Sunday, June 12, 2011

front wheel alignment


is part of car maintenance, aimed at adjusting the front and rear suspension.
adjustment (front wheel alignment) there are 3 sections will be undertaken adjustment: chamber (the slope of the front wheel viewed from the front of the vehicle).
castter (slope of the front wheel viewed from the side of the wheel).
to in (the difference between the distance, the distance of the front tires left and right front wheels and rear spacing on the front wheel)

by doing penyetalan against the suspension was intended to.

1. maintenance of tires, for uneven tire wear conditions, aims for long-lasting tires

2. car running straight, not moving to one direction to the left and right, the car will always be straight when driving, although drivers off the driver's steering.

3. steering system was light during the round.

4. the style steering wheel back, when conditions turn.

5. vehicle is always stable when driving at high speed.

front wheel alignment can be done if there are problems in the steering system or there are problems to ausan uneven tire.
but should, be done regularly. for example be done when the vehicle / car is menepuh distance of 20,000 miles.

Monday, June 6, 2011

tune up

engine tune up is the adjustment or adjustments to the carburetor system and engine ignition system.
importance of tune up the car, is the realignment of the machine, this should be done for vehicles always prime condition, the system will be undertaken during a tune-up adjustment is the fuel system, ignition system of said tune up, two things that often performed by a mechanic.
fuel systems such as air filter, fuel filter and caburator system (without engine EFI systems, electronic fuel injection).
ignition systems such as spark plugs, spark plug wires, and coil (ignition adjustment manually when the machine is still user system distributors)
many online videos or stages of car do tune ups for the vehicle or your car, so when you do a tune up their own match is expected.
how long time to always do the tune up on your car engine, do every vehicle after traveling about 10,000 miles (min) or 20,000 miles (max).

Friday, May 27, 2011

replace the power steering oil

oil change power steering your car, there is no timetable are located to replace power steering oil car, oil should be checked power steering your car at mile 60 to 80 km, oil power steering good condition should be colored red, and when it is dirty or has been decreased quality, the oil turns black.
black when it should be done replacement power steering with a new oil, a way to drain the whole oil, this should be done if not, do you ever bother with a complaint on your car is leaking power steeringnya, and how much money will be issued by you to repair power steering system.
replacement do it early before you in bother by the leakage of power steering system.

Tuesday, May 24, 2011

Timing belt warning lamp flame

repair the timing belt warning lights flash on the vehicle / car you how to reset toyota innova
reset stage lights TIMING BELT
* press and release the button to change the display mode meter Odo
* turn the ignition OFF position
* press and hold the meter, and turn the ignition ON
* press and hold the meter more than 5 seconds
* tomboldan off then press again for 5 seconds
* off button
* press and release to select the interval before the following warning lights flame
* after selecting the interval, hold the button for 5 seconds or more
* display mode back to Odo meter and warning lights off.
good luck, hopefully aide

Sunday, May 22, 2011

was heavy on the clutch/barn cars

was heavy on the clutch
conditions of heavy clutch very annoying and feels tired in your legs when driving a vehicle, this may be annoying, what causes the clutch is heavy.
clutch will feel heavy if the vehicle has suffered wear and tear on the clutch system, so technically if the clutch is thin or worn, then the step to decide when to pass the clutch teeth are so long that feels heavy in the foot when stepped on the clutch pedal. when the question is whether if the clutch is light conditions have to be replaced?
answer, depending on whether you think the clutch is heavy when it really bothers you, then if the "yes "to replace it with a new clutch.
conclusion of a new clutch when the vehicle is a light, after the use by a specified period of the clutch will wear thick clutch which will result in heavy clutch, clutch weight will continue to grow according to usage.
final conclusion: the clutch can not be in sets for the purpose of ease, the clutch will feel lighter back then the clutch must be replaced with new ones.

Thursday, May 19, 2011

abnormal sound at the bottom of the car

 sounds very annoying when driving a vehicle and your comfort is interrupted, it is often imagined that the vehicle when it has a very large damage, abnormal noise does not necessarily indicate a very large damage, abnormal sound samples that experienced by owners toyota avanza, toyota rush, the sound abnormal sounds in the back of the car, if this happens try to do checks on the transmission mounting car.
transmission mounting damaged condition will cause an abnormal sound with great sound.
for security in your car should do the replacement as soon as possible.

Monday, May 16, 2011

steering wheel shakes when braking

steering wheel shakes when braking
symptoms experienced during braking after a high speed, the steering feels a vibration, these symptoms are very annoying to drive to the convenience and security,
cause of the problems mentioned above are
1. condition of front brake shoes have a thin conditions.
2. disc brakes (disc rotor) bumpy.
from two causes above, must be repaired because vehicles will not be safe when used continues.
repairs, replacement of brake shoes when thin, and if after inspection, brake shoes still in good condition then ascertained the cause of the problem is that the wavy brake discs.
to mempebaiki disc brakes have 2 options repair
1. replace with new brake discs
2. do the disc brake lathe,
of the two fixes above, there are some advantages and disadvantages.
if done disc brake lathe, lathe success rate of about 75% done, then suggest replacing it with a new brake disc.

front wheel alignment

is part of car maintenance , aimed at adjusting the front and rear suspension . adjustment ( front wheel alignment ) there are...